Harrow rotary MRN-12
Harrow rotary MRN-12

Harrow rotary MRN-12 trailer . State compensation to 40%. In-house production. Guarantee. Delivery in Ukraine is free. Any form of payment. Payment upon delivery to the farm. Harrow rotary MRN-12 is equipped with two six foot hoes on the whole frame and transport carrier ( module) on which are mounted hoes. Harrow MRN-12 ( complex) can be used as a 12 meter long unit, and two 6 metre single unit . The set includes all the necessary components . Reinforced timber frame – wall thickness 8 mm. Reinforced front section ( 40х40х5 ) , the increased thickness of the pendulum is 16 mm, the increased spacing of the impellers to 230 mm. Installed, the vertical spring section with a long interval adjustment of the spring force using the screw. The hub of the impeller section is closed by a cap on the thread. Height under the frame 650 mm is used for the surface cultivation of the soil ( destruction of superficial crust on the soil), soil saturation with oxygen, mulching the soil to conserve moisture in the soil, pre-emergence and post-emergence harrowing , continuous and interrow processing of grain and tilled crops , the destruction of filamentous germination of the weeds to solid and inter-row cultivation of crops, incorporation of manure into soil after spreading. Harrow-hoe rotary working bodies which wheels with a diameter of 530 mm, special form, typed sections to the frame Assembly. The main purpose of the MRN is a pre-emergence and post-emergence harrowing of field crops (cereals, row crops, technical) with a view of the surface of loosening and aeration of the soil, destruction of filamentous germination of weeds. The principle of operation When the tractor, the wheels begin to rotate spontaneously (like the disk guns), deepened into the soil to a depth of 3-5 cm, whereby the surface crust is destroyed. The output beam of the wheel of the earth turns the explosion, which occurs due to the injection of air into the soil. Causing the nitrogen contained in the air passes into the fertile soil and absorbed by plants. This gives you the opportunity to abandon the introduction of nitrogen fertilizers. Working bodies hoe creates the perfect background for the initial development of the root system of plants, good multimedia the top layer of the soil, destroys soil crust, thereby, moisture is retained. During operation of the BMR is corrupted to 0.8% of the cultivated plants. For comparison when processing Zubov harrows type BSS injuries account for 10-15 %. This destroyed threadlike roots of weeds up to one hundred percent at speeds up to 15 km per hour. Timely application of the harrow can replace herbicides. With the appearance of a monolithic soil crust during early germination of cultivated plants, such as corn in the stage of 2-3 leaves, the application of teeth of the harrows becomes impossible and then the efficiency increases dramatically hoes. Specifications: Working speed, km/h 15-20 Working width, m 12 Performance, ha/h 12.5 Depth, cm 2-5 The number of sections, PCs 54 The number of impellers 108 PCs The number of teeth on the impeller , 16 PCs The bearings in the wheel hub bearing 30204 , 2 PCs The bearings in a pendulum mechanism 60204, 3 PCs Transport width , m 3. Transport length, m 6.2 Tractors with a capacity of 95-100 HP Personnel, man: 1 (tractor). The method of aggregation semitrailer The track width of the outer , m 2.87 Internal track width, 2.26 m The average track width, 2.57 m


Harrow rotary MRN-9
Harrow rotary MRN-9

Harrow rotary MRN-9 hydraulic . The timber frame of the harrow with a wall thickness of 8 mm. Reinforced front section ( 40х40х5 ) , the increased thickness of the pendulum is 16 mm, the increased spacing of the impellers to 230 mm. Installed, the vertical spring section with a long interval adjustment of the spring force using the screw. The hub of the impeller section is closed by a cap on the thread. State compensation 25-40% . In-house production. Guarantee. Delivery in Ukraine is free. Any form of payment. Payment upon delivery to the farm. Harrow rotary MRN-9 is used for destruction of superficial crust on the soil, the soil saturation with oxygen, mulching the soil to conserve moisture in the soil, pre-emergence and post-emergence harrowing , the destruction of filamentous germination of the weeds to solid and inter-row cultivation of crops, incorporation of manure into soil after spreading. Effective use of rotary hoes for spring harrowing of winter wheat. Working bodies hoe create the perfect backdrop for the initial development of the root system of the plants well mulched top soil, destroying the soil crust, thereby maintaining the moisture, destroy filamentous roots of weeds up to 100% at speeds up to 20 km/h. This makes it possible to go to bezgrebelny technology. With the appearance of a monolithic soil cover on the early seedlings of cultivated plants, such as corn in the stage of 2-3 leaves, when the use of the harrow teeth is not possible, the efficiency increases dramatically hoes. Harrow rotary - tilled aggregated with tractors of class from 105 HP and above. Aggregation method – hinged Technical characteristics of the rotary harrow: Working speed, km/h 10-18 Working width 9 m Performance up to 15 ha/h Machining depth of 2-5 cm The number of sections, PCs 39 Personnel, man : 1 (tractor). Aggregation method : hinged Impeller diameter, mm 530 The number of working fingers on the wheel piece 16 The bearing in the wheel hub taper roller 30204, 2 PCs The bearing in the pendulum 60204, 3 PCs Weight , kg 1800


Harrow rotary MRN-6
Harrow rotary MRN-6

Harrow rotary MRN-6 is solid timber frame with working wheels and protection. State compensation 25-40% . In-house production. Guarantee. Delivery in Ukraine is free. Any form of payment. Payment upon delivery to the farm. Harrow has a reinforced timber frame – 140х140 mm wall thickness 8 mm. Reinforced front section ( 40х40х5 ) , the increased thickness of the pendulum is 16 mm, the increased spacing of the impellers to 230 mm. Installed, the vertical spring section with a long interval adjustment of the spring force using the screw. The hub of the impeller section is closed by a cap on the thread. Height under the frame 650 mm is used for the surface cultivation of the soil ( destruction of superficial crust on the soil), soil saturation with oxygen, mulching the soil to conserve moisture in the soil, pre-emergence and post-emergence weeding of crops (cereals, row crops, technical) , the destruction of filamentous germination of the weeds to solid and inter-row cultivation of crops, incorporation of manure into soil after spreading. Specifications harrows hoes rotary: Aggregation method – hinged Working speed km/h 10-15 Working width, m 6 Performance, ha/h 12.5 Depth, cm 2-5 The number of sections, PCs 27 Impeller diameter , mm 530 The number of working fingers on the wheel piece 16 The bearing in the wheel hub bearing 30204 taper roller , 2 PCs The bearing in the pendulum 60204 , 3 PCs Is aggregated with tractors of class 1,4 Personnel, man: 1 (tractor).


Harrow rotary MRN-6-01 hydraulic
Harrow rotary MRN-6-01 hydraulic

Harrow rotary MRN-6-01 with hydraulic impeller and protection . Harrow rotary for enhanced timber frame wall thickness 8 mm, reinforced front section ( 40х40х5 ) , the increased thickness of the pendulum is 16 mm, the increased spacing of the impellers to 230 mm. Installed, the vertical spring section with a long interval adjustment of the spring force using the screw. The hub of the impeller section is closed by a cap on the thread. State compensation 25-40%. Guarantee. Delivery in Ukraine is free. Any form of payment. Payment upon delivery to the farm. Designed for surface loosening soil soil saturation with oxygen, mulching the soil to conserve moisture in the soil, pre-emergence and post-emergence harrowing, solid and inter-row processing of grain, tilled crops, industrial crops , destruction of filamentous germination of the weeds to solid and inter-row cultivation of crops, incorporation of manure into soil after spreading. Effective use of rotary hoes for spring harrowing of winter wheat. Working bodies hoe create the perfect backdrop for the initial development of the root system of the plants well mulched top soil, destroying the soil crust, thereby maintaining the moisture, destroy filamentous roots of weeds up to 100% at speeds up to 20 km/h. This makes it possible to move on without herbicide technology. With the appearance of a monolithic soil cover on the early seedlings of cultivated plants, such as corn in the stage of 2-3 leaves, when the use of the harrow teeth is not possible, the efficiency increases dramatically hoes. Rotary hoe - tilled aggregated with tractors of class 1.4-2 and above . Aggregation method – hinged Specifications harrows hoes rotary: Working speed km/h 10-15 Working width, m 6 Performance, ha/h to 12.5 Depth, cm 2-5 The number of sections, PCs 27 Impeller diameter , mm 530 The number of working fingers on the wheel piece 16 The bearing in the wheel hub bearing 30204 taper roller , 2 PCs The bearing in the pendulum 60204 , 3 PCs Personnel, man: 1 (tractor). Is aggregated with tractors of class 1.4 and 2









Похожие объявления "Transport" и в других регионах






Spare parts for MAZ buses PAZ LIAZ NEFAZ HIGER YUTONG GD
Spare parts for MAZ buses PAZ LIAZ NEFAZ HIGER YUTONG GD

TEKHSNAB, OOO is a direct supplier of spare parts for buses MAZ, PAZ, NEFAZ, LIAZ, YUTONG HIGER and GOLDEN DRAGON in the Russia. In our catalog you can find components and parts for urban, intercity and tourist buses of both Russian and Chinese manufacturers. Direct delivery is made to withstand competition in the market and offer customers spare parts at wholesale prices. We are distinguished by flexible system of discounts, individual approach to each client, professional selection of spare parts original and aftermarket production. We have been successfully working for more than 10 years, and many wholesale and retail customers throughout Russia value us as a reliable partner and supplier of s/h and spare parts for the buses. We answer our reputation for the quality of goods sold. Cooperation with major Turkish manufacturers of pneumatic and hydraulic systems for buses of Russian and foreign production allows us to offer you Turkish quality at the best price. LLC "TEKHSNAB" representative factory "BELKOMMUNMASH" in Russia for the sale of spare parts for trolleybuses AKSM models 321, 420, 333, 433. Windshield, consumables are always in stock in warehouses of our company. Delivery is possible in any point of Russia various transport companies to the place designated by the buyer terminal TK, warehouse, office, bus depot. Delivery in Moscow and Moscow region is carried out on their own. Our warehouses are located in Moscow, Minsk and Kaluga. Payment is possible in cash or by Bank transfer.









Heavy Scraper Planner Argan 5.0

Heavy scraper planner for tractors 160-300 HP Due to its weight planner works through the rice check in straight lines and in a single pass removes the amount of soil which must be removed. This in turn increases productivity and reduces fuel consumption. Due to the presence of the hopper and in the case of filling the scheduler can transport the soil to the place of filling. Scraper planner Rome is a modernized hybrid that combines 2 functions scheduler –alignment and scrapers –soil movement at a given point. GPS system Trimble will allow You to forget what a normal topography of the check. The system for a few minutes will do check all the pictures from the satellite, and build reports to follow up on the receipt. Able to work on a small rice checks (3 Hectares 150 x 200 ) Construction with solid welded beam box-section can withstand severe operating conditions and provides a high level of precision alignment. Balancing axle provides stability to the scraper when operating at higher speeds. Specifications: Model:Scraper planner Argan-5.0 Capacity: cubic yards (cubic meters) 10.7 Overall size: Length – see 688 The maximum size of rail:Width – see 522 Height – see 282 The dimensions of the bucket:Length – 140 cm Width – see 490 Height – 114 cm Net weight: 8087 kg Tyres: the ribs – the number, size (4) 16.5 x 70 Cutting width: see 490 Required power HP:250 - 300 The type of coupling beam: a Special coupling bar for tractors Operating speed K/h To 12 km/h. Price: On request

3 year