Solid reinforced concrete piles intended for pile foundations of buildings and structures. Reinforced concrete piles are durable, have high strength due to the production of heavy concrete with filaments of rebar. Applicable to any type of soil in any climate. Allow you to build a Foundation on the sloping areas through the use of different length piles. Ensure the stability of the structure due to the deep immersion piles into the ground. Dimensions (length*width*height): 3000-12000*300*300 mm Weight: 0,680-2,700 tons.

Concrete M400 and class B30 refers to the heavy concrete with high density and strength. Suitable for structures exposed to heavy loads. According to GOST 7473-94 M400 concrete has a strength class B30 (maximum load which can withstand a concrete M400 – 393 kg/cm2); has a level of immunity to cold F200 (able to withstand 200 cycles of freezing and complete thawing); has a level of moisture resistance W10 (according to the scale 2-20); has a density in the range from 2390 to 2440 kg/m3. Concrete M400 is not used in private construction. It is used in the construction of automobile and railway bridges; the construction of hydraulic structures; filling the most complex of columns in commercial buildings, parks and stadiums; construction of multi-storey buildings up to 25 storeys, where pile foundations are used; in the construction of plate bases at airfields, military installations and other facilities for special purposes.

Concrete piers transmission lines SV are used for power transmission poles with the voltage of 0.38 and 6-10 kV at rated ambient temperature to -55oC with. The reinforced concrete pylon is resistant to strong winds, have a high level of mechanical strength and seismic resistance, have anti-vandal design to eliminate possibility of destruction, able to last for a long time. For the production of transmission towers used heavy concrete (class B30), crushed granite and steel of high strength. The mechanical strength of the supports is achieved thanks to the installation inside the construction of the reinforcing frame and the technology of vibrocompaction (to eliminate air pockets and even distribution of the concrete mix). Dimensions (length*width*height): 9500-11000*185-280*165-280 mm Weight: 0,750-1,125 tons.

Step to the stairs of concrete is the main element of interior and exterior staircases of apartment houses, public and industrial buildings and structures. These steps are highly durable, capable of withstanding high level loads. Concrete stair treads may be of length up to 2200 mm, inclusive, and are made from a skeleton of rebar, pour concrete mix. Dimensions (length*width*height): 1000-2200*145*330 mm Weight: 0,107-0,245 t.

Rings for wells KS - reinforced concrete annular shape of reinforced concrete for construction inspection, water and sewer wells. The production of rings for wells in accordance with GOST and GOST 13015-2003 8020-90. Concrete solution applies fine-grained with high water resistance. To reinforce concrete used reinforcing wire and reinforcing rods of high tensile steel. Reinforced concrete rings for wells have high strength and long life of the elements; easy and economical maintenance (the surface of the walls of the wells of these rings is polluted very slowly). Dimensions (length*width*height): 1160-1680*890*80-90 mm Weight: 0,600-1,000 tons.

Staircases LM - reinforced concrete ware for use in the construction of public and industrial buildings and private residential houses for the connection of floors (interlevel transitions). Staircases are manufactured in our company are of high strength, durability, high wear resistance, moisture resistance, fire resistance, resistance to low temperatures. These properties are achieved using high quality concrete and vibratory molding of concrete for uniform distribution and heat treatment of products during the day. Dimensions (length*width*height): 2720-3030*1050-1200*1400-1500 mm Weight: 1,330-1,700 tons.

Floor slabs hollow-core PC is used for inter-floor and roof space of residential and public buildings, buildings under design load 800 kg/m2 without taking into account its own weight. The advantages of these plates - excellent resistance to bursting and resistance to lateral loads, fire resistance and moisture resistance. Slab PC is a slab of heavy concrete, kruglosutochnye of formation of a formwork of the type. In the process of making seven concrete poured into the formwork with reinforcement cages. Reinforcement of these slabs is done by using grids and intense reinforcing bars in various types of valves according to the requirements of GOST 10884-94. In the manufacturing process uses vibration and electro-thermal processing. To under the weight laid above the walls the edges of the plates are not deformed, after installation on the object close up of lightweight concrete, which leads to improved heat and sound insulation properties. According to GOST 13015.0-83, these plates are allowed cracks in the operation of not more than 0.3 mm (width of opening of cracks) and the minimum allowable difference in length, thickness and width. The size of the voids in slabs PC is equal to 159 mm, making them convenient for the installation of communications in high-rise buildings. Dimensions (length*width*height): 1980-6280*1490*220 mm Weight: 0,93-of 2.98 tons.

Sidewalk curbs are used for finishing areas as part of landscape design, for separating roads from sidewalks, lawns, playgrounds, etc. Production is carried out in accordance with the requirements of GOST 6665-91 of heavy concrete. This concrete product has a rectangular shape in the form of timber with a beveled edge. Dimensions (length*width*height): 1000*220*75 mm Weight: 0,040 tn.

Road plates are used for the coatings of pavements of roads in areas with complex soil hydrological and climatic conditions with an estimated air temperature of the coldest month up to -55oC with, as well as the construction of permanent and temporary urban roads with design outdoor air temperature up to -40oC, the construction of sites for industrial zones. They can also serve as limiters and protection of road slopes from erosion. Material for production of road plates is heavy concrete (М350) and longitudinal pre-stressing reinforcement steel. These products are able to withstand and distribute evenly all over the canvas a multi-ton load, thereby minimizing weight and mechanical effects on underground communication pipelines, which often are covered, and increasing the service life of roads.

Foundation blocks FBS of heavy concrete of high quality. All units equipped with a metal conveyor loops. Manufacturer of Foundation blocks (FBS) carried out according to GOST 13579-78. The technology of vibrocompaction, so that the concrete is evenly distributed, which protects against cavities within the block. High strength, resistance to compression, excellent insulation, moisture - and frost resistance of FBS may be used in the construction of walls of cellars, technical subfield of buildings, walls, basements, repair bridges, for the construction of garages, including high strength, at the laying of the prefabricated strip foundations in the construction of residential, administrative and industrial use. The benefits of choosing FBS: lower price on the blocks and significant time savings due to fast installation compared to concrete mixes for filling the Foundation. Depending on the specific conditions, which are under construction – the nature of soil, climate, the load on the blocks and the number of floors in the building, selected the necessary type of Foundation blocks. Dimensions (length*width*height): 880-2400*300-600*280-580 mm Weight: 0,310-1,960 tons.